|
|
Relation between Preparation Parameters of Belite Cement and its Hydraulic Properties
Staněk, Theodor ; Palou, Martin (referee) ; Škvára, František (referee) ; Havlica, Jaromír (advisor)
The dissertation thesis is devoted to the study of belite clinkers and to the possibilities of the increase in their hydraulic activity. The mechanism and the kinetics of belite clinker formation were studied together with the relation of the velocity of these processes and the hydraulic activity of clinker. The influence of various parameters (degree of lime saturation, duration and temperature of burning) of the belite clinker preparation on the belite clinker development in time, on belite polymorphism, on the chemical composition of belite crystals and on the belite cement hydraulic activity was studied, too. The research methods used for the investigation involved electron microscopy, optical microscopy, X-ray diffraction analysis, high-temperature microphotometry and calorimetry. The resulting clinkers were hydraulically activated by addition of calcium sulfate. The experiments have proven that the higher rate of belite formation does not lead to the increase of its hydraulic activity, as opposed to that of alite. On the other hand, the chemical activation by sulfate anions enables to prepare clinker with relatively higher degree of lime saturation with minor admixture of alite and anhydrite, which is hydraulically activated. The work was concluded by experimental burning of belite clinker doped with sulfate anions in a model rotary kiln and by the preparation of cements blended with common industrial alite clinker. The results indicate the possibility of separate industrial production of special belite clinker alongside with common alite clinker and the production of economically and environmentally beneficial blended Portland cements with suitable technological parameters, or targeted production of special cements with properties corresponding to their required utilization.
|
|
|
Relation between Preparation Parameters of Belite Cement and its Hydraulic Properties
Staněk, Theodor ; Palou, Martin (referee) ; Škvára, František (referee) ; Havlica, Jaromír (advisor)
The dissertation thesis is devoted to the study of belite clinkers and to the possibilities of the increase in their hydraulic activity. The mechanism and the kinetics of belite clinker formation were studied together with the relation of the velocity of these processes and the hydraulic activity of clinker. The influence of various parameters (degree of lime saturation, duration and temperature of burning) of the belite clinker preparation on the belite clinker development in time, on belite polymorphism, on the chemical composition of belite crystals and on the belite cement hydraulic activity was studied, too. The research methods used for the investigation involved electron microscopy, optical microscopy, X-ray diffraction analysis, high-temperature microphotometry and calorimetry. The resulting clinkers were hydraulically activated by addition of calcium sulfate. The experiments have proven that the higher rate of belite formation does not lead to the increase of its hydraulic activity, as opposed to that of alite. On the other hand, the chemical activation by sulfate anions enables to prepare clinker with relatively higher degree of lime saturation with minor admixture of alite and anhydrite, which is hydraulically activated. The work was concluded by experimental burning of belite clinker doped with sulfate anions in a model rotary kiln and by the preparation of cements blended with common industrial alite clinker. The results indicate the possibility of separate industrial production of special belite clinker alongside with common alite clinker and the production of economically and environmentally beneficial blended Portland cements with suitable technological parameters, or targeted production of special cements with properties corresponding to their required utilization.
|
guest ::
